32-bit Cortex®-M4F MCU with ETH / dual OTG / dual QSPI / SDRAM / DVP, 288 MHz CPU

Ultra-high performance — AT32F437 series, powered by ARM® Cortex®-M4 core, has brought about up to 288 MHz computing speed to the world. Featuring internal single precision floating-point unit (FPU), digital signal processor (DSP) and memory protection unit (MPU), it is provided with rich peripherals and flexible clock control mechanism for a wide range of applications. In particularly, it supports up to 4032 KB Flash memory and 512 KB SRAM, far beyond its counterparts in terms of performance.

Besides, AT32F437 series is also provided with Security Library. This library is a defined area protected by a code in the main memory so that solution providers can not only program core algorithm in it with great peace of mind, but also provide downstream customers with room for secondary development. Meanwhile, AT32F437 series incorporates 2x OTG controllers (Xtal-less in device mode), 2x QSPIs for external SPI Flash memory or SPI RAM extension, 8x UARTs, 2x CANs, 4x SPIs/I²Ss (2x full-duplex), 3x high-speed ADC engines (5.33 Msps), 8~14 bit digital video parallel interface (DVP), an XMC for the extension of SDRAM, SRAM and PSRAM, and IEEE-802.3 10/100Mbps Ethernet port controller for IoT applications, greatly improving the reliability while lowering the costs. AT32F437 devices can perform well in the temperature range of -40 to 105 ℃ . It also provide a variety of chips for selection in response to diverse memory requirements through its powerful on-chip resource allocation, higher integration and cost-effectiveness. Thanks to its outstanding performance, the AT32F437 series will be undoubtedly the best partner for applications that require higher computation and larger memory including industrial automation, motor control, IoT and consumer electronics.

Key Features

  • Performance
    • ARM® Cortex®-M4 MCU up to 288 MHz
    • Single precision floating-point unit (FPU)
    • Flash Memory access zero wait
    • 2.6 to 3.6 V application supply
    • I/Os 5 V-tolerant
    • Temperature range -40 to + 105 °C
  • Memories
    • 256/1024/4032 KBytes of Flash memory
    • 128 to 512 KBytes of SRAM
    • sLib: configurable part of main Flash set as a library area with code executable but secured, non-readable
    • Up to 2 x QSPIs, scalable Flash memory or RAM, address mapping support
  • Clock
    • PLL (288 MHz output)
    • External high-speed 4 to 25 MHz crystal oscillator
    • Internal high-speed 48 MHz RC oscillator (-40°C to 105°C)
    • Automatic clock calibration (ACC) (accuracy 1 % at TA = 25 °C, 2.5 % at TA = - 40 to +105 °C)
    • External low-speed 32.768kHz RTC crystal oscillator
    • Internal low-speed 40 kHz RC oscillator
  • Reset and supply management
    • Sleep, Deepsleep and Standby modes
    • Power-on/Low-voltage reset (POR/LVR)
    • Programmable voltage monitor (PVM)
    • VBAT supply for RTC and 20 x 32-bit backup registers
  • Analog peripherals
    • 3 x 12-bit 5.33 Msps A/D converters (up to 24 channels)
    • 2 x 12-bit D/A converters
  • Timers
    • 3 x 16-bit motor control PWM advanced timers with dead-time generation
    • 2 x 32-bit and 8 x 16-bit general-purpose timers
    • 2 x 16-bit basic timers
    • 2 x watchdog timers (Independent and Window)
    • SysTick timer: a 24-bit downcounter
  • ERTC:
    • enhanced RTC with alarm, subsecond precision and hardware calendar
  • Communication interfaces
    • 3 x I²Cs (SMBus/PMBus)
    • 4 x SPIs / I²S (36 MHz SPI, and I²S2/I²S3 support full-duplex)
    • 4 x USARTs + 4 x UARTs (ISO7816 interfaces, LIN, IrDA capability and modem control)
    • 2 x SDIOs
    • 2 x USB full-speed OTG controllers (crystal-less in device mode)
    • 2 x CAN interfaces (2.0B active)
    • Infrared transmitter
    • 10/100Mbps Ethernet MAC with dedicated DMA and 4 Kbytes of SRAM, IEEE 1588 hardware support and MII/RMII
  • DMA
    • 22-channel DMA controller supports timers, ADC, DAC, SDIOs, I²Ss, SPIs, I²Cs, DVP, QSPIs and USARTs
  • Fast I/O ports
    • Up to 116 I/O ports, all mappable on 16 external interrupts and almost all 5 V-tolerant
    • All fast I/Os, control registers accessible with fᴀʜʙ speed
  • External memory controller (XMC)
    • Supports CF card, SRAM, PSRAM, NOR, NAND and SDRAM memories
    • Supports LCD parallel interface, 8080/6800 modes
  • Digital video parallel interface (DVP)
    • 8~14 bit digital video parallel interface
  • Packages
    • LQFP64 10 x 10 mm
    • LQFP100 14 x 14 mm
    • LQFP144 20 x 20 mm

ARM Cortex®-M4F AT32F437 Product Selector

Part Number AT32F437xxT7
RC RD RG RM VC VD VG VM ZC ZD ZG ZM
CPU frequency (MHz) 288
Int. Flash(1)(2) ZW(KB) 256 256 256
NZW(KB) 0 192 768 3776 0 192 768 3776 0 192 768 3776
Total (KB) 256 448 1024 4032 256 448 1024 4032 256 448 1024 4032
SRAM(2) (KB) 384KB(Default), Configurable up to 512KB
XMC 1(3) 1(4)(5) 1
SDRAM - 1(4) 1
QSPI 2 2 2
Timers Advanced-control 3 3 3
32-bit
general-purpose
2 2 2
16-bit
general-purpose
8 8 8
Basic 2 2 2
Systick 1 1 1
WDT 1 1 1
WWDT 1 1 1
ERTC 1 1 1
Communication I²C 3 3 3
SPI/I²S(6) 4/4 (2 full-duplex) 4/4 (2 full-duplex) 4/4 (2 full-duplex)
USART+UART 4/4 4/4 4/4
SDIO 2 2 2
USB full-speed OTG 2 2 2
CAN 2 2 2
Infrared transmitter 1 1 1
Analog 12-bit ADC
numbers/channels
3
16 16 24
12-bit DAC
numbers/channels
2
2 2 2
DVP(7) 1 1 1
GPIO 53 84 116
Operating temperatures -40°C ~ 105°C
Packages LQFP64
10x10 mm
LQFP100
14x14 mm
LQFP144
20x20 mm
Note
  1. ZW = zero wait-state, up to SYSCLK 288 MHz
    NZW = non-zero wait-state
  2. The internal Flash and SRAM sizes are programmable with user option bytes on the basis of an integer multiple of 64 bytes.
  3. For LQFP64 package, XMC only supports 8-bit LCD panel.
  4. For the LQFP100 package, XMC supports to directly connect a multiplexed NOR/PSRAM memory, a 16- or 8-bit NAND Flash memory, and the SDRAM. The interrupt line cannot be used since Port G is not available in this package.
  5. For the LQFP100 package, XMC supports a non-multiplexed NOR/PSRAM memory via the external latch circuit. Refer to AN0068 for more information.
  6. Half-duplex I2S shares the same pin with SPI.
  7. Only LQFP144 package supports maximum 14-bit mode; LQFP100 and LQFP64 packages support maximum 12-bit mode.

Resources

Product Select Guide

Cross Reference Table

Description Download Version Date
Cross reference table    AT32 MCU V202011 2020.11.03

Datasheet

Reference Manual

Evaluation Board

Component Library

BSP

Pack

Tool

USB Tool and Driver

Application Note

Tech Support

Artery provides customers with an extensive range of technical support, including development board, various development tools, hardware and database consulting services to help expedite product development and shorten time to market. Please contact us further for detailed information.

support_artery@arterytek.com